EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Flow Meter
Flow Meter
Pioneers in the industry, we offer turbine flow meter and electromagnetic flow meter from India.
Turbine Flow Meter
Product Price: Rs 7,500 / UnitGet Best Price
Minimum Order Quantity: 1 Unit
Product Brochure
Specifications:
| Size | 10-25 mm NB (threaded end connection) |
| 40-150 mm NB (C.S. flanged end connection) | |
| Materials | SS 304/316 throughout/PP/PVC |
| ROTOR-Teflon/SS/Delrin | |
| Bearing-Ceramic bush bearing | |
| Accuracy | ±0.5% for liquid. |
| (over 1:5 flow Range inclusive of Linearity & repeatability) | |
| Pressure Drop | 0.05 to 0.2 Kg/cm at 100% flow Range. |
| Pressure | As per flange specifications |
| Temperature | Upto 100 C |
| Calibrated | Calibrated on water |
Get Best Quote
Request Callback
Electromagnetic Flow Meter
Product Price: Rs 13,500 / UnitGet Best Price
Minimum Order Quantity: 1 Unit
Product Brochure
Backed by strong expertise and comprehension, we manufacture, export and supply only the best quality range of Electromagnetic Flow meter in the worldwide market. This flow meter is perfectly designed for the pipes with diameter of 10 mm to 600 mm. Widely used for corrosive as well aggressive range of conductive liquids, this electromagnetic flow meter find application in petrochemical, chemical and process industries.
Features:
Features:
- Based on faraday's law of electromagnetic induction
- Available in liner and electrode materials
- Excellent accuracy
- Full-Bore EMFM from: ½” to 24” sizes
- Medium Conductivity: >5 uS/cm
- Flow Tube Part: SS 316 / SS 304 (Non Magnetic)
- Meter Sizes: 1/2'”to 24” Pipe sizes. For Higher size consult Factory
- Electrodes: SS 316L or optionally Hastalloy ‘C’
- Process Connection: S series: SS 304 M.S. 150 Flange, E series: Epoxy painted M.S. 150 Flange
- Lining: S series Lining: PTFE, E series: Hard Rubber / EPDM / Neoprine
- Sensor Housing: Epoxy painted M.S OR SS 304 optional
- Flow Velocity: 0.1 to 10 m/s in two ranges
- Pressure Rating: Standard Flanges - ASA150 options on request 15 bar Standard, higher on request
- Operating Temperature Medium: S series: 0 to 150 Deg.C for PTFE lining • E Series: 0 to 70 DegC for Hard Rubber lining
- Operating Temperature Ambient: 0 to 55 Deg. C
- Power Supply: 24Vdc or 230Vac or Battery Operated
- Power Consumption: 12VA max
- Key Board: 6 Key Membrane Key Board
- Electrodes: SS 316L or optionally Hastalloy ‘C’
- Programmable parameters: Volume Units: ltrs, M3, ML, CF. BG; Time Units: sec, min, hrs- 4 to 20 mA range
- % Low flow cut of, Pipe Dia, Discharge range, Comm. Parameters Calibration Constant
- Filter Constant
- Data Logger (Optional): RTC with 24 column Printer, Battery Charger +SMF Batteries and
- Data Transmission (Optional): RS 485 MODBUS RTU or ASCII Protocol or RS232C, HART, with 4 to 20 mA option as
- add-on module –available
- Data Communication (Optional): An SMS based or GPRS based communication module with software is available as optional at
- extra price. The Modem connects through the RS232C port .The flow meter can be equipped with
- GSM Modem
- Thus following configuration can be given: Respond with data to a message (SMS) from any user
- (Query response mode) Periodic
- GPRS based Data transmission to a fixed IP address / user’s website
- SMS to Cell number stored, in case of alarm condition
- Flow parameter: Programmable - Volume Units : ltrs, M3, ML, CF, BG - Time Units: sec, min, hrs
- Configurable Parameters: F.S. for 4 to 20 mA range, %Low flow cut off, Communication Parameters Calibration Constant
- Damping (Filter)
- Calibration: Factory Calibrated on certified flow rig
- Ingress protection: IP 65 / IP 67
- Electronics Enclosure: Powder coated Die cast Aluminum
- Flame proof Version: Please contact factory
Get Best Quote
Request Callback
Electromagnetic Flow Meter
Product Price: Rs 15,500 / UnitGet Best Price
Minimum Order Quantity: 1 Unit
Product Brochure
Leveraging on our vast industrial experience, we are engaged in offering Electromagnetic Flow Meter. These flow meters are used for conductive liquids such as raw water, chilled water, effluents, potable water and industrial chemicals. Our professionals manufacture the offered products using high grade raw material and modern technology. The offered products are available in various specifications to meet the diverse needs of the clients.
Features:
Specifications:
Features:
- Compact design
- Low maintenance
- Long working life
- Accurate measurement
Specifications:
- Full-Bore EMFM from: ½” to 24” sizes
- Medium Conductivity: >5 uS/cm
- Flow Tube Part: SS 316 / SS 304 (Non Magnetic)
- Meter Sizes: 1/2'”to 24” Pipe sizes. For Higher size consult Factory
- Electrodes: SS 316L or optionally Hastalloy ‘C’
- Process Connection: S series: SS 304 M.S. 150 Flange, E series: Epoxy painted M.S. 150 Flange
- Lining: S series Lining: PTFE, E series: Hard Rubber / EPDM / Neoprine
- Sensor Housing: Epoxy painted M.S OR SS 304 optional
- Flow Velocity: 0.1 to 10 m/s in two ranges
- Pressure Rating: Standard Flanges - ASA150 options on request 15 bar Standard, higher on request
- Operating Temperature Medium: S series: 0 to 150 Deg.C for PTFE lining • E Series: 0 to 70 DegC for Hard Rubber lining
- Operating Temperature Ambient: 0 to 55 Deg. C
- Power Supply: 24Vdc or 230Vac or Battery Operated
- Power Consumption: 12VA max
- Key Board: 6 Key Membrane Key Board
- Electrodes: SS 316L or optionally Hastalloy ‘C’
- Programmable parameters: Volume Units: ltrs, M3, ML, CF. BG; Time Units: sec, min, hrs- 4 to 20 mA range
- % Low flow cut of, Pipe Dia, Discharge range, Comm. Parameters Calibration Constant
- Filter Constant
- Data Logger (Optional): RTC with 24 column Printer, Battery Charger +SMF Batteries and
- Data Transmission (Optional): RS 485 MODBUS RTU or ASCII Protocol or RS232C, HART, with 4 to 20 mA option as
- add-on module –available
- Data Communication (Optional): An SMS based or GPRS based communication module with software is available as optional at
- extra price. The Modem connects through the RS232C port .The flow meter can be equipped with
- GSM Modem
- Thus following configuration can be given: Respond with data to a message (SMS) from any user
- (Query response mode) Periodic
- GPRS based Data transmission to a fixed IP address / user’s website
- SMS to Cell number stored, in case of alarm condition
- Flow parameter: Programmable - Volume Units : ltrs, M3, ML, CF, BG - Time Units: sec, min, hrs
- Configurable Parameters: F.S. for 4 to 20 mA range, %Low flow cut off, Communication Parameters Calibration Constant
- Damping (Filter)
- Calibration: Factory Calibrated on certified flow rig
- Ingress protection: IP 65 / IP 67
- Electronics Enclosure: Powder coated Die cast Aluminum
- Flame proof Version: Please contact factory
Get Best Quote
Request Callback
Electromagnetic Flow Meter
Product Price: Rs 15,000 / UnitGet Best Price
Minimum Order Quantity: 1 Unit
Product Brochure
We take immense pride to introduce ourselves as one of the trustworthy manufacturers, suppliers and exporters of Electromagnetic Flowmeter. For their accurate result, durability and high efficiency, these flow meters are highly demanded across the market. To measure the flow of liquids, our offered electromagnetic flowmeter is extensively used in sugar and food & drug industries. Apart from this, customers can avail these electromagnetic flow meters from us at affordable prices.
Features:
- Higher Functionality
- Durable Work Life
- High Accuracy
Specifications:
- Full-Bore EMFM from: ½” to 24” sizes
- Medium Conductivity: >5 uS/cm
- Flow Tube Part: SS 316 / SS 304 (Non Magnetic)
- Meter Sizes: 1/2'”to 24” Pipe sizes. For Higher size consult Factory
- Electrodes: SS 316L or optionally Hastalloy ‘C’
- Process Connection: S series: SS 304 M.S. 150 Flange, E series: Epoxy painted M.S. 150 Flange
- Lining: S series Lining: PTFE, E series: Hard Rubber / EPDM / Neoprine
- Sensor Housing: Epoxy painted M.S OR SS 304 optional
- Flow Velocity: 0.1 to 10 m/s in two ranges
- Pressure Rating: Standard Flanges - ASA150 options on request 15 bar Standard, higher on request
- Operating Temperature Medium: S series: 0 to 150 Deg.C for PTFE lining • E Series: 0 to 70 DegC for Hard Rubber lining
- Operating Temperature Ambient: 0 to 55 Deg. C
- Power Supply: 24Vdc or 230Vac or Battery Operated
- Power Consumption: 12VA max
- Key Board: 6 Key Membrane Key Board
- Electrodes: SS 316L or optionally Hastalloy ‘C’
- Programmable parameters: Volume Units: ltrs, M3, ML, CF. BG; Time Units: sec, min, hrs- 4 to 20 mA range
- % Low flow cut of, Pipe Dia, Discharge range, Comm. Parameters Calibration Constant
- Filter Constant
- Data Logger (Optional): RTC with 24 column Printer, Battery Charger +SMF Batteries and
- Data Transmission (Optional): RS 485 MODBUS RTU or ASCII Protocol or RS232C, HART, with 4 to 20 mA option as
- add-on module –available
- Data Communication (Optional): An SMS based or GPRS based communication module with software is available as optional at
- extra price. The Modem connects through the RS232C port .The flow meter can be equipped with
- GSM Modem
- Thus following configuration can be given: Respond with data to a message (SMS) from any user
- (Query response mode) Periodic
- GPRS based Data transmission to a fixed IP address / user’s website
- SMS to Cell number stored, in case of alarm condition
- Flow parameter: Programmable - Volume Units : ltrs, M3, ML, CF, BG - Time Units: sec, min, hrs
- Configurable Parameters: F.S. for 4 to 20 mA range, %Low flow cut off, Communication Parameters Calibration Constant
- Damping (Filter)
- Calibration: Factory Calibrated on certified flow rig
- Ingress protection: IP 65 / IP 67
- Electronics Enclosure: Powder coated Die cast Aluminum
- Flame proof Version: Please contact factory
Get Best Quote
Request Callback
Turbine Flow Meter
Product Price: Rs 8,500 / UnitGet Best Price
Minimum Order Quantity: 1 Unit
Product Brochure
Specifications:
| Size | 10-25 mm NB (threaded end connection) |
| 40-150 mm NB (C.S. flanged end connection) | |
| Materials | SS 304/316 throughout/PP/PVC |
| ROTOR-Teflon/SS/Delrin | |
| Bearing-Ceramic bush bearing | |
| Accuracy | ±0.5% for liquid. |
| (over 1:5 flow Range inclusive of Linearity & repeatability) | |
| Pressure Drop | 0.05 to 0.2 Kg/cm at 100% flow Range. |
| Pressure | As per flange specifications |
| Temperature | Upto 100 C |
| Calibrated | Calibrated on water |
Get Best Quote
Request Callback